Mugen MTC2/R Shim Plate Set 2.0mm Brass Roll Centre Optimized Performance Parts

Mugen MTC2/R Brass Shim Kit: Dial Up Your Drift Game! 2.0mm Roll Center Upgrade!

Alright, listen up partner. This ain't just a thing you're lookin' at, this is a story waitin' to be written. Imagine this: you, cruisin' down the highway, sun beatin' down, wind in your hair, and this right here, this is the co-pilot, the wingman, the somethin' special that makes the whole damn adventure sing. It’s got that classic grit, that undeniable charm, that real deal authenticity that’ll make ya stand out from the herd. Think of it as your secret weapon, your lucky charm, your conversation starter. Yeah, it's somethin' you gotta feel, somethin' you gotta own. So, ditch the doubt, embrace the wild side, and grab this before it's gone. You know you want it. Your inner rebel is already cheerin'. Now, let's get this show on the road.

$4.79 $9.57

num:

description

Introducing our all new Brass Roll Centre Shim Plates for the Mugen MTC2!

Changing roll centres on your MTC2 has never been easier, rather than undoing the whole screw and having shims flying everywhere, simply loosen the screw, slide the shim plate out, and install the new roll centre shim plate, and re-tighten the screws!

With the success of our Carbon Roll Centre Shim Plates, and the ever demanding focus on weight distribution and adding additional weight down low on the Mid Motor platform, we decided to produce brass versions in the most common thicknesses used today. We have left the external (FF and RR) shim plates solid for maximum weight, whilst recessing the internal (FR and RF) for belt clearance.

Available in commonly used 1.5mm, 2.0mm and 2.5mm thicknesses, it gives you a great range of roll centre options to choose from, whilst being able to move weight around your car to adjust the front/rear weight bias. Whilst these may not be a large amount of weight, due to the placement on the car being very far from the centreline, it can have quite a big impact on the handling of your car.

We suggest running them both front, and rear. However if you feel you need more steering, you could replace the front with carbon and leave the rear brass. If you have too much steering and need more rear traction, then you could leave them in the front only, and use carbon in the rear.

These can also be stacked with the carbon 0.5mm and 1mm Shim Plates if desired.

Each pack comes with a pair of front and rear (different lengths) identified by the one (front) or two (rear) indents.

Features:

Easy roll centre adjustment
3 Different Thicknesses available for different roll centres (1.5, 2, 2.5)
1.5mm Set adds 8.7g of weight at the lowest point of the car
Adds weight at ends of the car to adjust weight bias
Useable with Standard and SlimFlex Chassis. Note; It will add an additional 0.25mm to the standard carbon chassis roll centre due to no recess
CNC Machined from high quality Brass in Melbourne, Australia

Includes: